PN-567261 Part was just completed in Electronic Assembly
PN-566085 Part was just completed in Electronic Assembly
PN-337126 Part was just completed in Electronic Assembly
PN-521631 Part was just completed in Electronic Assembly
PN-414097 Part was just completed in Electronic Assembly
PN-505519 Part was just completed in Electronic Assembly
DT Closed since work order already close .
Calibration has been completed.
PN-197637 Part was just completed in Electronic Assembly
PN-350304 Part was just completed in Electronic Assembly
PN-336946 Part was just completed in Electronic Assembly
The product tech restarted the gui.
PN-473319 Part was just completed in Electronic Assembly
PN-542448 Part was just completed in Electronic Assembly
PN-49712 Part was just completed in Electronic Assembly
PN-413806 Part was just completed in Electronic Assembly
PN-566093 Part was just completed in Electronic Assembly
Gui closed then restarted by product tech
PN-542466 Part was just completed in Electronic Assembly
PN-184676 Part was just completed in Electronic Assembly
entered random versions of twbmfg3 till software opened. Machine is up and running.
PN-476893 Part was just completed in Electronic Assembly
The firewall update was preventing Python.exe from launching. Fixed by Frederico.
replaced 2 pins and straighten others
replace backplane open slot 0
PN-197818 Part was just completed in Electronic Assembly
PN-541625 Part was just completed in Electronic Assembly
removed excess screws in feed tube
PN-476892 Part was just completed in Electronic Assembly
could not duplicate fault, return to production
Replaced the backplane and opened slot 0.
PN-542426 Part was just completed in Electronic Assembly
Closed and restarted the test exec.
Cycled power to the monitor and then the keyboard locked up. Restarted the pc and product is passing.
loose connection on swingarm - terminal locate # 1,3,5, & 7
repaired damaged connector stf-2359
reset screwdriver control unit
Operator selected the wrong catalog.
Scanned board numbers into excel and uploaded serial numbers and ASAs through FTPC Upload SN support menu.. Refurb technician also adjusted refurb consumption requirements.
removed extra screws inside jaw assembly
Replaced the pc in the tester. Removed one with the catalog # ending LXP and replaced it with one ending PXP.
During the resistor verification test Ch2 on the pod was failing out of tolerancae. replaced R3 and all of the Cannon pins tied to Ch2. Had to replace R3 twice and the pod now passes.
Reseated the keyboard connections.
544688060 - MAT Open Dowtimes with the same missing component - PN-521633 1 from 1 PN-521633 Part was just completed in Electronic Assembly
log in as Administrator, will monitor
PN-531137 Part was just completed in Electronic Assembly. *********Added to kit.******
let updates run there course